Epomax 01 Epoxy Primer
Epomax 01 is an epoxy based, two component and solvent free floor primer. Provides resistance to moisture, water and most chemicals. It forms a hard and shiny layer on the surface. It can be applied by mixing sand into its content. It has high strength. It can be applied on all industrial floors. It is also suitable for applying on concrete on sports floors.
- Packaging: 16 KG (A+B)
- Mixing Ratio: 10:6 (By Weight)
- Consumption: 0.20 kg – 0.30 kg/m²
- Gelling Time: 40-50 minutes
- Color: Transparent Brown
- Shelf Life: 12 months
The surface should be free from chemicals, dust and dirt. The floor must be smooth, dry and free of moisture. The application should be done at temperatures between 5°C – 30°C, under normal conditions and no different substance should be added to the product content.
A component is mixed in its own bucket, then B component should be added and mixed until a homogeneous mixture is obtained. Application can be done with a trowel or roll.
- Primer selection should be made according to the application to be made on the floor.
- Epoxy based primers are mainly preferred for industrial floors. The reason for this is generally epoxy system application.
- Epoxy primers are hard and their strength is very strong.
- It is suitable for the application of flexible or rigid products on a polyurethane primer.
- Polyurethane based primer is preferred in indoor sports halls, tartan floors, parquet adhesive applications, waterproofing systems and terraces.
- It is not recommended to add sand in polyurethane primers.
- Epoxy based primers have a hard structure and high strength.
- It is suitable for factory floors, warehouse floors, floors for insulation purposes, acrylic sports systems to be built on concrete.
- Epomax 02 HUM is an epoxy based moisture primer, suitable for use on damp surfaces.
- Moisture rate of the floor should be checked with a moisture measuring device, if the rate is between 3% and 7%, moisture primer should be applied.
- If the humidity on the surface is above 7%, the application should not be made. Normal type primers can be applied at 3% and below.
Epomax 01 is solvent and VOC (Volatile Organic Compound) free.