Epomax 02 Humidity Barrier (Epoxy Primer)
Epomax 02 is an epoxy based, two component and solvent free flooring primer. Provides resistance to moisture, water and most chemicals. It forms a hard and shiny layer on the surface. It can be applied by mixing sand into its content. It has high strength. It is especially suitable for use on moistured surfaces.
- Packaging: 16 KG (A+B)
- Mixing Ratio: 10:6 (By Weight)
- Consumption: 0.20 kg – 0.30 kg/m²
- Gelling Time: 40-50 minutes
- Color: Transparent Brown
- Shelf Life: 12 months
The surface should be free from chemicals, dust and dirt. The floor must be smooth, dry and free of moisture. The application should be done at temperatures between 5°C – 30°C, under normal conditions and no different substance should be added to the product content.
A component is mixed in its own bucket, then B component should be added and mixed until a homogeneous mixture is obtained. Application can be done with a trowel or roll.
- Primer selection should be made according to the application to be made on the floor.
- Epoxy based primers are mainly preferred for industrial floors. The reason for this is generally epoxy system application.
- Epoxy primers are hard and their strength is very strong.
- It is suitable for the application of flexible or rigid products on a polyurethane primer.
- Polyurethane based primer is preferred in indoor sports halls, tartan floors, parquet adhesive applications, waterproofing systems and terraces.
- It is not recommended to add sand in polyurethane primers.
- Epoxy based primers have a hard structure and high strength.
- It is suitable for factory floors, warehouse floors, floors for insulation purposes, acrylic sports systems to be built on concrete.
- Epomax 02 HUM is an epoxy based moisture primer, suitable for use on damp surfaces.
- Moisture rate of the floor should be checked with a moisture measuring device, if the rate is between 3% and 7%, moisture primer should be applied.
- If the humidity on the surface is above 7%, the application should not be made. Normal type primers can be applied at 3% and below.
Epomax primers provide easy use and penetrate the floor completely.